<b id="9vhn3"></b>

                <th id="9vhn3"></th>

                  Pitch adjustable type spiral conveyor

                  new time£º2015/3/6 11:55:00

                  Function description: Spiral conveyor is mainly used for transmitting pipes spirally in pipe external coating production line. Its function conform to the pipe external FBE, PE, PP coating and winding process requirements, which is characterized by large transmission torque, precise pitch, high speed adjustment on site, and small center offset.

                  Pitch adjustable type spiral conveyor has functions of small variation of pipe bottom height, and adjustment according to pipe diameter which is convenient to maintenant and deformation is small, it can use for rapid device prizing on site. The transmitting wheel angle of Slide-type spiral conveyor adopt ratchet adjustment; Two tire wrap angle is greater than 60 degrees, use the rod to connect between wheels, the rod is adjustable, ends of rod use the rod end joint bearing to connect, which ensure the simplicity and unity of tire angle adjustment, and make sure the smooth operation of the conveying line; The two mating surface between conveying wheel base and slide block is equipped with 1 ~ 2 mm ptfe sandwich, which is simple and save effort when adjusting the spacing between the wheels; the control accuracy in the control wheel set place are equipped with scale, in order to observe. After the adjustment the conveying line are locked with locking device, and ensure the control device can be taken down out.

                   

                  Photos on site

                   

                   

                  3-Dimensional

                   

                  Each decomposition figure

                   

                  Main Technical Parameter

                  S.N.

                  Name

                  Technical Parameter

                  1

                  Adaptable pipe diameter

                  Any diameter above 219

                  2

                  Wheel rotation speed

                  8¡«40r/min

                  3

                  Adjustable angle

                  ¡À15¡ã

                  4

                  Wheel center distance

                  2m

                   

                  contact

                  Langfang Dingsheng Mechanical Equipment Co., Ltd

                  Tel£º86-0316-2207771

                  86-0316-2207773

                  Tel£º18831688900

                  Fax£º86-0316-2231218

                  E-mail:dshjx@vip.sina.com

                  Add£ºNO. 198, AI'MIN ST. EAST, LANGFANG£¬HEBEI, CHINA

                   

                  日本中文不卡影片_免费在线观看印度av_久久91精品视频_免费全部高h视频无码_av无码免费无禁网站_99久久久精品免费